background image

51

MAINTENANCE  

Task List

Like cars, fitness products require maintenance. Regular maintenance ex-

tends product life, and failure to maintain products can void the manufac-

turer’s warranty. Copy the maintenance log sheet, and record maintenance 

work for each fitness product.

Daily tasks

1. Use a clean, lint-free towel, dampened with a mixture of Simple Green® 

    all-purpose cleaner and water, to thoroughly clean the product exterior.

2. Inspect all screws. Secure if necessary.

3. Run a treadmill test everyday to make sure it is operating properly.

Monthly tasks

1. Inspect walk belt alignment. Align the walk belt if necessary. Inspect for 

   wear.

Quarterly

1. Inspect the walk deck for wear. Flip the walk deck if necessary.

2. Inspect the walk belt guides for normal rotation.

3. Inspect the front roller for normal rotation.

4. Inspect the rear roller for normal rotation.

5. Remove dust and debris from the motor compartment.

yearly

1. Replace the drive belt once every three years.

2. Replace the lubricant bottle every 40,000km/25,000mile. 

Caution

 

Please follow standard safety precautions when servicing on this product.

 

Electronic components can carry an electrical charge even after the prod-

uct has been turned off. For safety, turn off unit power. Wait five minutes to 

allow capacitors to discharge. Then disconnect the power cord from the wall 

socket (if applicable.) Only after such steps have been completed should 

covers be removed and electronic components accessed.

 

Do NOT use cleaners with alcohol, ammonia, or other damaging chemi-

cals. The use of such chemicals can damage the product and void the war-

ranty. Never spray or pour any liquid directly onto the product. Doing so can 

damage electronic components and void the warranty.

 

This product has moving parts that can be hazardous. Exercise caution 

when maintaining, operating, or moving this product.

Содержание T645L























































Отзывы: