background image

49

MAINTENANCE  

Lubrication System (Continued)

Error Messages:

There are 2 error messages with this system.

Error 1: It indicates that the system memory failing and it will not be able to 

perform any auto lubrication.

Error 2: It indicates motor is failing or system will not be able to perform any 

function.

If any of these messages showing, contact your local dealer for servicing.

Protective Message:

Indication

Buzzer 

occurred

Buzzer sound 

frequency

Action

Protective 

message

Replace 

lubricant bottle

If an abnormal-

ity occurs during 

the operating, the 

buzzer will sound 

for 30 seconds.

The buzzer will 

sound for 0.5 sec-

onds and stop for 

0.5 seconds.

The buzzer will 

stop working after 

30 seconds.

Replace lubricant 

bottle. 

Press & hold 

RESET Key for 3 

seconds and then 

choose Yes.

CH Oil

Lubrication VR 

motor damaged

If an abnormal-

ity occurs during 

the operating, the 

buzzer will sound 

for 30 seconds..

The buzzer will 

sound for 2 sec-

onds and stop for 

2 seconds.

The buzzer will 

stop working after 

30 seconds.

Replace lubrica-

tion VR motor.

ERR.02

EEPROM 

damaged

If an abnormal-

ity occurs during 

the operating, the 

buzzer will sound 

for 30 seconds.

The buzzer will 

sound for 2 sec-

onds and stop for 

2 seconds.

The buzzer will 

stop working after 

30 seconds.

Replace new 

lubrication 

system.

ERR.01

Lubrication 

system cannot 

accumulate 

mileage

If an abnormality 

occurs, the buzz-

er will sound for 

60 seconds after 

the unit is turned 

on for 20 times.

The buzzer will 

sound for 1 sec-

ond and stop for 

1 second.

The buzzer will 

stop working after 

60 seconds.

Wipe dust off the 

sensor if neces-

sary. 

Replace the sen-

sor if damaged.

ERR.03

Lubrication 

system cannot 

accumulate 

mileage

If an abnormality 

occurs, the buzz-

er will sound for 

60 seconds after 

480 hours.

The buzzer will 

sound for 1 sec-

ond and stop for 

3 second.

The buzzer will 

stop working after 

60 seconds.

Wipe dust off the 

sensor if neces-

sary. 

Replace the sen-

sor if damaged.

ERR.04

Содержание T645L























































Отзывы: