43
OPERATION
Workout Programs (Continued)
•
INCLINE control mode
If incline is your preferred heart rate control variable, the incline position
will automatically change to maintain your target heart rate. You can also
press INCLINE ▲/▼ keys to manually adjust the incline and speed value.
Heart rate control programs require the use of a telemetry heart rate strap.
If no heart rate signal is detected at any time during the operation of a heart
rate control program, the message “NO HEART RATE READING, PLEASE
CHECK TRANSMITTER” will appear on the display, followed by the startup
banner screen.
After a heart rate control workout is activated, a heart illustration will appear
on the dot matrix screen. When the actual heart rate signal is detected, the
color of the heart illustration will alternate between red and green. Otherwise,
it will maintain with green color. Orange color represents the 65% or 80% of
max HR or target heart rate entered.
During exercising, the console will compare the actual heart rate against the
target setting.
•
SPEED control mode
a. If the actual heart rate is slower than target setting, the message will show
“PRESS SPEED OR INCLINE UP”, “PRESS SPEED UP” or “PRESS
INCLINE UP”.
b. If the actual heart rate is higher than target setting, the message will show
“PRESS INCLINE DN”.
•
INCLINE control mode
a. If the actual heart rate is slower than target setting, the message will show
“PRESS SPEED UP” .
b. If the actual heart rate is higher than target setting, the message will show
“PRESS SPEED DN”.
