3URJUDPPDEOH7UDLQLQJ&RPSXWHU
FUNCTION BUTTON
67$576723
To start or stop monitor counting.
02'(
Press to select functions between time, pulse, distance, and calorie.
83'2:1
To adjust and set all functions, and training programs setting.
5(6(7
To have the monitor jump to initial display for training mode selection. If you hold on
pressing the button for 2 seconds, the monitor will reset previous training as a new start.
FUNCTIONS
&5&/,0%('5$7(
The monitor will calculate and display the time duration of climbed elevation of
500m that you have worked out.
&0LQ0&/,0%('0,187(
The monitor will calculate and display the climbed elevation per minute.
** C.R. and C/Min M will switch display to each other on the same field in every
6 seconds.
7,0(
Count up - To accumulate training time from 0:00 to 99:59 with one second increment when the
training starts.(No preset target)
Count down - The monitor will start to count from preset time down to 0:00 with one second
decrement
when the training starts. As soon as the preset time is achieved, the monitor starts
to alarm, and TIME will start to count up immediately from 0:00.
(/(9
&/,0%('
Count up - To accumulate the climbed elevation from 0 to 9999 m with 10 m increment when
the training starts. (No preset target elevation climbed)
Count down - The monitor will start to count from preset elevation down to 0 with 10 m (or
ml)
decrement when the training starts. As soon as the preset target is achieved, the monitor starts
to alarm, and ELEV. CLIMBED will start to count up immediately from 0.
&$/25,(
Count up - To accumulate calories consumption from 0 to 9999 cal with one cal increment when
when the training starts. (No preset target)
Count down - The monitor starts to count from preset calories down to 0 with 1 cal decrement
when the training starts. As soon as the preset calories is achieved, the monitor starts to alarm,
and CALORIES will start to count up immediately from 0.
67$57
6723
5(6(7
83
'2:1
