$66(0%/<)25
6/,'(3/$67,&&29(5 &29(5
Step 1. Put the slide plastic cover(G8) into
the position beside the (B).
As shown on 1 .
Step 2. Pull down the cover same
as shown on 2 .
Step 3. Slide the cover(G7) to connect
with (G8). (See shown on 3 ).
Then, fix it by bolts(G2).
The same way to assemble left
side covers.
$66(0%/<)25
021,725 :$7(5%277/(
Step 1. Remove the screws(F2) from the
back of the Monitor(F).
Step 2. Connect the sensor wire (B5 & B6)
with monitor wires and put the
monitor on the fixing plate.
Step 3. You can put the water bottle on the
plastic housing.
