Sportig Spinstar Racer, Руководство пользователя

Страница: 6 / 11

6
Step 1:
Remove the main frame (1), front tube(4)and rear tube(7) , locking
them with M10cap (2), flat washer(3) and M10x55carriage screws. Use a
Phillips screwdriver (23) to tighten the tube. The tube is installed.
Step 2:
In accordance with figure A, remove the rear intubation (10), Loosen the
Knob (8) and insert the rear intubation (10), and tighten the Knob (8.)
In accordance with figure B, then remove the cushion tube (11), align the
hole, and insert to the rear intubation (10), and tighten the knob (8).
Follow the instructions in Figure C, remove the cushion (12), put it into
the cushion tube (11). Tighten the screws on both sides of the cushion
with a wrench, as shown in Figure D.
Description of Installation: