14
service:
Tel.: 0 63 31 / 14 80-0 • Fax: 0 63 31 / 14 80-220 • www.sport-tec.de
Englisc
h
Pat testing
when used in a workplace, this product must be safety-tested yearly by a qualified
electrician (PaT Tested) in order to comply with the Electricity at work regulations.
we recommend that it is PaT tested regularly when used in a domestic environ-
ment.
general safety Requirements
Domestic wiring must be tested periodically by a qualified electrician at least once
every 10 years or at every change of occupancy. For office and retail premises, and
buildings such as village halls, the wiring must be inspected at least once every 5
years. It is recommended that all buildings be fitted with smoke alarms (it is manda-
tory for new buildings).
If the mains lead is damaged, it must be replaced by the manufacturer or an autho-
rised service centre. If the mains plug needs to be replaced, proceed as follows:
•
Connect the brown wire to the terminal labelled„l“.
•
Connect the blue wire to the terminal labelled „n“.
•
Connect the green/yellow to the terminal
labelled with the earth symbol or „E“.
•
Make sure that the cord-grip is positioned
correctly (over the outer sheath of the cable)
and it is fully tightened.
•
If the plug is fitted with a 13 a fuse, replace
it with a 5 a fuse
•
•
•
•
•
disposal and Recycling
You must not dispose of this appliance with domestic household
waste. Most local authorities have specific collection system for
appliances and disposal is free of charge to the end-user.
when replacing an existing appliance with a similar new appli- ance your retailer
may take the old appliance for disposal.
GENERAL SAFETY REQUIREMENTS
