SportDOG SportTrainer 875, Быстрый старт, Страница: 5 / 76

EN
ES
FR
IT
NL
DE
5 SPORTDOG.COM
STEP::02
TURNING THE COMPONENTS ON AND OFF
Once charged, the Remote Transmitter is on. Press any button to send signals.
TO TURN THE COLLAR RECEIVER ON
Press and release the On/Off Button. The Receiver Indicator Light will come on and the Collar Receiver will beep
1 - 2 times, depending on what static stimulation range is chosen. To extend the battery life between charging
cycles, turn off the Collar Receiver when it is not in use. The default is 2 (medium).
TO TURN THE COLLAR RECEIVER OFF
Press and release the On/Off Button. The Receiver Indicator Light will come on solid red and the Collar Receiver
will beep for 2 seconds. To extend the battery life between charging cycles, turn off the Collar Receiver when it is
not in use.
STEP::03
PROGRAM THE REMOTE TRANSMITTER
The SportTrainer
®
SD-875E Remote Transmitter has 8 operational modes to allow you to select the best
match for your type or style of training. See STEP 05 of your Operating Guide for complete descriptions of the
available modes.
NOTE: The Remote Transmitter is factory set to mode 1.
TO CHANGE THE MODE:
1. Refer to the following table to review the available modes.
2. Using the Intensity Buttons
+/- , set the display to 1.
3. Turn the Remote Transmitter over.
4. Using a pen or the tine of a buckle, depress and release the Mode Button. Select the desired mode using the
Intensity Buttons +/- . After 5 seconds, your selected mode will flash to indicate that it has been set. Your
remote transmitter will now return to the same Intensity level and dog to which it was previously set.
For multi-dog operation, refer to STEP 04.