6
CHANGING BALLS AND STRIKES:
To change BALLS or STRIKES, press the respective keys on the keypad. If you enter
more BALLS or STRIKES than you intended, simply press the respective keys on the
keypad to cycle back to the correct number of either BALLS or STRIKES.
CHANGING OUTS:
To change OUTS, press the OUT key on the keypad. The third OUT will clear the BALLS
and STRIKES to nothing dispalyed.
NEW BATTER:
To clear all balls and strikes for the next batter, press the NEW BATTER key.
WIRELESS CONTROLLER BATTERY REPLACEMENT
Wireless controllers receive their power from 4 AA batteries that are accessible by removing the
back cover on the controller. From time to time the batteries need to be replaced. The back
cover is held in place by tabs on the cover itself and is a snug fit so that no tools are required for
the battery swap. The following steps illustrate the process.
Step 1:
Turn the controller upside down and notice the pocket along the top edge.
Step 2:
While holding the controller, pull up on the back cover at the pocket to remove it. This will
take some pressure as the cover is designed with a “friction” type fit.
Step 3:
Replace the 4 AA batteries with 4 quality brand batteries, making sure they are in the
proper orientation with respect to polarity.
