5
GETTING STARTED
Begin by making sure the Game Insert that came with your scoreboard is in the sleeve on the
face of the controller, as in the image below.
CHANGING GAME MODES:
When initially powering the scoreboard, pay attention to the far right digit of the HOME
score (ones position). It should display a 5 (this indicates baseball) for a few seconds and
then change to a 0 (zero). If it does not, press the SELECT GAME button for three (3)
seconds and then press the Inning button (button #5 on the keypad). To store the selection
press the Out button (button #9). Next, press the NEW GAME button to begin game-play.
STARTING A NEW GAME:
At power-up, the scoreboard is ready for game play. In the event you need to begin again
or start a new game, simply press and hold the NEW GAME button for three seconds. This
will clear the information from the scoreboard and display the start-up values of zero (0) in
both scores, a one (1) in the Period, and no balls, strikes, or outs.
CHANGING HOME SCORE:
To increase the HOME score by one, press the HOME SCORE key on the keypad. To
decrease the HOME score by one press the “red” -1 HOME key on the left side of the
keypad.
CHANGING GUEST SCORE:
To increase the GUEST score by one, press the GUEST SCORE key on the keypad. To
decrease the GUEST score by one press the “red” -1 GUEST key on the left side of the
keypad.
CHANGING INNINGS:
To increase INNING by one press the INNING key.
EDIT INNINGS:
To edit the INNINGS, press the EDIT key quickly followed by the INNING key, this will only
decrease the INNING by (1) one each time.
