Sportable Scoreboards 2218LED, Руководство по установке

Страница: 6 / 13

6
HANGING THE SCOREBOARD FROM THE CEILING
1. Remove the scoreboard from its packaging, making sure not to pry against or cut into the
scoreboard. Inspect the unit for shipping damage according to the instructions on page 1.
NOTE: CARE MUST BE TAKEN NOT TO DAMAGE THE SCOREBOARD WHILE LIFTING IT INTO PLACE. IF THE
SCOREBOARD WILL BE “AGAINST” THE LIFTING DEVICE, PLACE CARDBOARD OR PACKING FOAM BETWEEN
THE LIFT AND THE SCOREBOARD BEFORE LIFTING. ALSO, IF THE SCOREBOARD HAS WIRELESS
COMMUNICATION, REMOVE THE ANTENNA FROM THE FRONT OF THE SCOREBOARD BEFORE LIFTING TO
PREVENT DAMAGE. TAKE CARE TO REPLACE THE ANTENNA WHEN THE INSTALLATION IS COMPLETE.
2. If eye bolts, cables or chains are to be used to suspend the scoreboard, ensure that they are
capable of supporting the weight of the scoreboard. Choose one of the following methods to get
the scoreboard into place:
•
Connect the cables or chains you will use to suspend the scoreboard to the hanging
brackets on top of the scoreboard cabinet using “C” clips or clevises. Connect the strap,
cable, or chain you will use to lift the scoreboard to the two outside mounting holes in the
top rear flange.
OR:
•
Connect the cables or chains you will use to suspend the scoreboard to the hanging
brackets on top of the scoreboard cabinet using “C” clips or clevises. Connect the strap,
cable, or chain you will use to lift the scoreboard to the same “C” clips or clevises.
3. If the scoreboard will be against the lift during lifting, place cardboard or foam between the lift and
scoreboard to protect the face of the scoreboard.
4. Lift the scoreboard into place. Check clearance during lift. Connect the suspension system and
lower the scoreboard until its weight is on the suspension system and disconnect the lifting cables
from the scoreboard.
5. Place a level in the top channel of the scoreboard cabinet to see if adjustments need to be made.
NOTE: It is recommended that the cables that will be used to permanently suspend the
scoreboard be attached to the ceiling structure first, then to the scoreboard’s hanging
brackets after it is lifted into position using a lifting device.
(See illustration on Page 5 for location of hanging brackets.)