Sportable Scoreboards 2218LED, Руководство по установке

Страница: 4 / 13

4
INSTALLATION OVERVIEW
This manual will walk you through the installation of the scoreboard. While care has been taken to
consider the many scenarios for installation, some general information applies to all. Use this guide
as closely as possible to ensure proper installation, as follows:
1. Review the product specifications below to determine your specific installation hardware.
2. Mount the scoreboard to the wall or suspend it from a ceiling structure.
3. Install the electrical service for the scoreboard and the controller.
4. Install the control cable for cable-controlled systems. NOTE: DO NOT have the signal
cable and power to the scoreboard in the same conduit or race way. No additional
installation is necessary for Wireless Remote Control systems.
5. Install any options, such as sponsor panels or protective nets, according to the installation
instructions included with each option package.
6. Test the installed system.
PRODUCT SPECIFICATIONS
Overall Dimensions:
8’ L x 2’ W x 8” D, shipped in one (1) section
Weight:
Hanging weight
Approx. 110 lbs
Shipping weight
Approx.135 lbs
Power Requirements:
Scoreboard:
1. 1 - 120-volt, 20-amp, 60 Hz grounded AC circuit. Ideally, this will be a dedicated circuit.
2. Access must be provided to turn off the power to the scoreboard after each use. Failure
to turn off the power to the scoreboard could affect the functionality of the scoreboard;
such as from a power surge or lightning strike.
3. It is important to utilize the equipment ground inside the scoreboard cabinet at the utility
box provided for the AC power connection.
Hand held controller:
Will be powered through the communication cables from the scoreboard terminated at the
connection at the wall cover plate.