Variable Mirror-Ball Motor
15
EN
ON
OFF
1
2
3
4
6
5
4.2 Moun�ng instruc�ons
1. Place the unit in a suitable loca�on on the ceiling and
mark the posi�on of the 2 screw holes in the base
plate.
2. You need 2 screws with a diameter of 5 mm for fasten-
ing. Countersunk screws are unsuitable and can dam-
age the moun�ng plate.
3. Drill the appropriate holes and use the appropriate
moun�ng material (e.g. dowels) on the ceiling.
4. Fix the Variable Mirror-Ball Motor with the 2 screws.
Check that the unit is secure and firmly seated.
5. A�ach the mirror ball (not included). Hook the load
chain and the safety chain with the screw chain links
into the shackle. Note: Do not open the shackle to
a�ach the chains.
6. When moun�ng the mirror ball, follow the instruc�ons
that you received from the manufacturer of the mirror
ball.
7. Insert the mains plug into a suitable socket (230V,
50/60Hz). The unit is now ready for use.
4.3 Controlling the Rota�on
Switch on the motor with the "ON" bu�on. The speed of
rota�on and the direc�on of rota�on of the motor can be
controlled via the control bu�ons. The device is equipped
with a memory func�on. The selected se�ngs are re-
tained a�er switching off or in the event of a power fail-
ure. When the unit is switched on again, it works with the
last selected se�ngs.
1. Use the ON / OFF bu�ons (3) to switch the standby
mode on and off.
2. Use the 'an�clockwise - clockwise' keys (4) to change
the direc�on of rota�on.
3. Use the "slow - fast" keys (5) to set the speed of the
rota�on. The current rota�on speed level is shown in
the LED display.
①
Port for radio receiver module or WLAN module
②
Channel selector
③
Stand-by on/off
④
Direc�on
⑤
Rota�on speed
⑥
LED display for rota�on speed level
