INSTRUCTIONS FOR USE
Please read before use!
WHAT DO I NEED TO BE AWARE OF BEFORE STARTING THE DEVICE FOR THE FIRST TIME?
°
Check all parts for damage. Do not use the device if it is damaged in any way. Do not use in damp rooms
or on damp substrates. The battery must be charged. When using inside the roll, the BOOSTER must sit
securely in the roll.
HOW DO I SCREW ON THE INDIVIDUAL ATTACHMENTS CORRECTLY?
°
The thread adapter is needed to fit the attachments.
The attachments can be fastened using a simple
turn-and-screw mechanism.
HOW DO I SWITCH THE DEVICE ON?
°
Charge your BOOSTER fully before switching it on for the first time!
°
Start the BOOSTER by pressing and holding the + and - buttons simultaneously for several seconds. After
one second, the LEDs will indicate the battery status. The device will start after around three seconds and
switches itself off again automatically after 10 minutes. If vibration is still required after this period, press
the two buttons again.
HOW DO I SET THE INTENSITY?
°
The intensity of your BOOSTER’s vibration can be regulated using the + and - buttons. The green LEDs
indicate the intensity range. The buttons can be actuated in steps by pressing them repeatedly. Alternatively
you can increase or lower the intensity by pressing one of the buttons for a longer period of time.
60