SPmoto Motorcycle Скачать руководство пользователя страница 34

Страница: 34 / 92

Maintenance Fundamentals

Battery

！

WARNING

Your motorcycle has a maintenance-free type
battery. You do not have to check the battery
electrolyte level or add distilled water. Clean
the battery terminals if they become dirty or
corroded.

The battery gives off explosive
hydrogen gas during normal
operation.

Do not remove the battery cap seals. There is
no need to remove the cap when charging.

A spark or flam can cause the battery
to explode with enough force to kill or
seriously hurt you.

NOTICE

Your battery is a maintenance-free type and can
be
permanently damaged if the cap strip is
removed.

❙

Cleaning the Battery Terminals

1. Remove the battery.

→

P. 39

2. If the terminals are starting to corrode and

are coated with a white substance, wash with
warm water and wipe clean.

This symbol on the battery means that
this product must not be treated as

household waste.

Wear protective clothing and a face
shield, or have a skilled mechanic do
the battery servicing.

continued

An improperly disposed of battery can be harmful
to the environment and human health.Always
confirm local regulations for battery disposal.

NOTICE

Содержание Motorcycle





























































































Результаты поиска

Содержание Motorcycle

Отзывы:

SPmoto Motorcycle, Руководство пользователя, Страница: 34 / 92

Результаты поиска

Содержание Motorcycle

Отзывы: