SPmoto Motorcycle Скачать руководство пользователя страница 10

Страница: 10 / 92

TYRE INFORMATION

Cold tyre pressure:
[Driver only]

Safety Guidelines

Front
Rear

225 kPa
225 kPa

Tyre size:
Front
Rear

120/70/14
120/70/14

ACCESSORIES AND LOADING

• The safety stability and handling of this
   motorcycle may be affected by the addition
  of accessories and luggage.
• Read carefully the instructions contained in

user’s manual and installation guide before

installing any accessory.

• The total weight of accessories and luggage

added to rider’s

weight should not exceed 172 kg (380 lb),
which is the maximum weight capacity.

• The luggage weight must not exceed

15 kg

under any circumstances.
• The fitting of large fork-mounted or large
handlebar mounted fairing is not recommended.

SAFETY REMINDER

For your protection, always wear helmet, protective
apparel.

Tyre brand: INNOVA
Front
Rear

IA-3008-02
IA-3008-02

FUEL LABEL

Unleaded petrol only

DRIVE CHAIN

Keep chain adjusted and lubricated.
25 to 35 mm Freeplay

Содержание Motorcycle





























































































Результаты поиска

Содержание Motorcycle

Отзывы:

SPmoto Motorcycle, Руководство пользователя, Страница: 10 / 92

Результаты поиска

Содержание Motorcycle

Отзывы: