Split-fire 2000 Series, Руководство пользователя, Страница: 22 / 28

2000, 3000 & 4000 Series 3-Point
Service & Maintenance
Owners Manual
22
4. Maintenance
Maintaining your machine is important and will ensure that the
machine lasts year after year offering smooth and reliable operation.
4.2 Log Splitter Maintenance
4.21 Frame
It is important to maintain your frame for smooth operation. Clean
your machine, including inside the frame and the slider assembly.
Debris may build up and cause damage during extreme neglect. It is
best to clean frame with high pressure air or a pressure washing
system.
Do NOT grease or oil the slide assembly. The UHMW slide pads are
designed to operate without the addition of oil or grease. Oil and
grease will attract dirt and debris particles and will drastically lower
the life span of the slide pad
Slide pad wear will occur over time and can be checked by slider
“play”. Slide can be checked by measuring the movement on the top
of the knife. The “play” can be measured by completing the following
steps.
1. Move the knife to the middle of the stoke. Equal distance
between the front and back stop.
2. Utilize a rubber mallet hammer to hit the knife to the farthest
left.
3. Use a flat edge (Ruler, Level, etc.) against the side of the
frame in a vertical position to use as a measuring point.
4. Measure the distance between the flat edge and the top of the
knife.
5. Utilize a rubber mallet hammer to hit the knife to the farthest
right.
6. Place the flat edge in the same position and remeasure the
distance between the flat edge and the knife.
7. If 3/8” “play” is observed, the slide pads need replacement.