Split-fire 2000 Series, Руководство пользователя, Страница: 21 / 28

2000, 3000 & 4000 Series 3-Point
Owners Manual
Operating Instructions
21
3.3 After Operation and 3 Point disconnection
After splitting, steps can be completed to keep you machine in good
operating status.
1. Once splitting is completed, the machine needs to be cleaned.
Its important to clean inside the frame to remove wood debris.
This can be most effectively done with air pressure via a
blower, or a water pressure washer. A garden hose will also
clean the frame. (Do NOT grease or oil slide pads after
cleaning)
2. Give the log splitter a quick visual inspection. Check for loose
fasteners, oil leaks, etc., and repair where needed.
3. Remove the hydraulic hoses from the rear remotes on the
tractor.
4. Lower the 3 Point Hitch to ground level and remove the linch
pins. Then remove the log splitter from the 3-point hitch.
5. Tuck the 2 hoses into the end of the log splitter. This keeps
them clean, rust free and out of the way of any damage that
can occur.
If any unnecessary noise occurs stop operation immediately and
check for damage. If nothing can be seen, contact a dealer to book
an inspection. If there are no dealers in your area, contact Split-Fire
Sales Inc.