USE
10
EN
1. No touch operation.
2. Shake excess water from hands.
3. Place hands under the outlet to start operation (fig. 12).
4. Slowly move hands back and forth under the outlet at the bottom of
the dryer.
5. The blue hand location LED situated by the dryer outlet starts with
the drying operation.
6. The dryer and blue LED stops when the hands are removed.
7. Hand dryer also auto shuts off after 50 seconds of uninterrupted use.
12
MAINTENANCE AND CLEANING
Lift the Unit off the wall mounting bracket before maintenance or repair.
13
Regular maintenance
Regularly clean the outer casing use a soft, damp cloth to gently wipe away any dirt.
CAUTION: Never use abrasives or chemicals to clean the cover. Do not soak.
Periodical deep clean
1. Clean and maintenance must not taken until the unit has been removed from the wall mounting bracket or cut off
power.
2. Use the service tool or security hex driver to remove the two cover security screw.
3. Remove the cover.
4. Clean all dust and lint from the interior of the hand dryer.
5. Replace the cover.
6. Wipe the cover with a damp cloth.
⚠
If there is an electrical or motor problem, the blue LED will flash when
hands off the placed under the dryer outlet.
The sterilization function turns on and off automatically
