08/2005
510200020-510230020
6/26
Pneumatic Chain Saw 5 1020/5 1021/5 1022/5 1023
FOR YOUR SAFETY
Do always hold the saw tight in both of your hands for the right guiding.
The right hand is holding the back handle (even left-hander) pipe handle and handle should be
hold tight with the thumb.
Make sure that you are standing very solidly.
Put the saw under full power into the cut and place the claw-type stop fixed - only than
start to cut
Defend dangers in general
When you have put on the hear protecting you need to be very attentive and careful because
you cannot recognize dangers soon enough (sounds like screams, signals etc.) If there is a
danger, immediately switch off the motor.
Do not put a leg or an arm into the enlarged sawing range of the chain.
Pull the saw out of wood only if the chain is still working.
Never work without a stop. The saw can possibly pull the worker to the front.
Work attentively and quietly and only with good light and clear sight.
Do not get others in danger. Attentive working is important.
