WARNING: This heater shall only be used by persons instructed in its use that have been
been expressly authorized to do so. Before using this heater please pay particular attention
to the following safety warnings as failure to do so could result in serious injury.
1
Make sure you have read and understood the whole instruction manual before installing,
operating or carrying out any maintenance on the unit.
2
Warnings and data plates on the machine provide important directions and information
on the safe use of the unit.
3
Besides these operating and safety instructions please make sure that all accident
prevention regulations applicable in the country of use are followed.
4
As well as these operating and safety instructions any standards relating to the
installation and operation of industrial heaters applicable in your country must be
strictly followed.
1
For safe moving of the unit between work areas make sure that the unit has been
switched off and is allowed to cool if necessary.
2
Lift from handle of the machine.
3
For safe transport in and on vehicles make sure the machine is appropriately strapped
in order to avoid it sliding or falling.
1 GENERAL
- The heater unit must be positioned on flat stable ground and must be in an upright
position before operating. Do not operate on uneven surface or loose gravel.
- The heater unit must be checked that it is safe and in proper working order before
putting into service and before every use. If the unit is damaged do not use it.
- The heating space must be properly ventilated in compliance with this manual and the
heater unit must be serviced as per maintenance guidelines in this manual to avoid
carbon monoxide build up, which can lead to death.
SAFETY INSTRUCTIONS & PRECAUTIONS
IMPORTANT SAFETY INSTRUCTIONS
AND PRECAUTIONS
GENERAL WARNING
TRANSPORT
Содержание JETFIRE DI16
Страница 8: ...Figure B Figure A Figure G Figure H...
