Spirit XE520s, Руководство по обслуживанию

Страница: 6 / 30

5
Model XE520s Service Replacing Parts
Part 2. Handle Bar Assembly Rev.
1
2
3
Procedures
：
1. Use Phillips Head Screw Driver
to release three 3.5x12mm Sheet
Metal Screws which secure
Handle Bar Covers, as shown in
figure 1.
2. Release further two M5x15mm
Phillips Head Screws which
secure Connecting Arm Covers,
as shown in figure 2.
3. Use 12m/m_Wrench and
13m/m_Wrench to release 5/16"
× 1-1/4"_Hex Head Bolt,
5/16
"
x20x1.5 T flat washer and
5/16
"
x7T nut which secure
Connecting Arm and fish-eye
bearing, as shown in figure 3.
4. Use 12m/m_Wrench to release
5/16" × 15m/m_Hex Head Bolt
and 5/16
"
x23x1.5T washer which
secure the Handle Bar, as shown
in figure 4.
4