XE500 Elliptical
16
XE500 Console
Power on
When the A.C. power cord is connected to the Elliptical and the power switch turned on, the
console will automatically power up. If there is no input to the console for 20 minutes the console
will go to stand-by mode. In stand-by mode the console display will turn off. To turn the console on
press any key.
When initially powered on the console will perform an internal self-test. During this time all the
lights will turn on. When the lights go off, the dot matrix display will show a software version (i.e.:
VER 1.0) and the message window will display Odo , for Odometer, and a distance and hour
number. The odometer reading shows how many hours the elliptical has been used and how
many virtual miles the elliptical has gone.
The odometer will remain displayed for only a few seconds then the console will go to the start up
display. The dot matrix display will be scrolling through the different profiles of the programs and
the message window will be scrolling the start up message. You may now begin to use the
console.
Operation of Your Elliptical
Heart rate bar graph
Display view
Fan
Message window
Heart rate indicator
Program buttons/
numeric key
pad Quick keys
Display view
Control keys
Dot matrix
