XE500 Elliptical
12
STEP 3: Connecting Arm Assembly
Untie the wire holding the sleeve spacer (22) in place on the rod-end bearings, located on the ends
of the connecting arms (8&9).
Align the hole in the rod ends with the hole in the brackets of the
left and right Handle Bar (10&11). The rod end should be on the inside of the U shaped Handle
Bar bracket.
Secure with A 5/16 x1-1/4 Hex Head bolt (79), 5/16 x20mm Flat Washer (100) and
5/16 Nylon Nut (91) by using 13/14 mm Wrench (124) and 12 mm Wrench (129).
79
9
8
79
22
91
11
100
22
91 100
10
