Spirit XE320, Руководство пользователя

Страница: 17 / 29

XE320 Elliptical
16
Strength
The
Strength
program is designed to increase muscular strength in your lower body. This program will
steadily increase in resistance to a high level and then keeps you there. This is designed to strengthen and
tone your legs and glutes.
Interval
The Interval program takes you through high levels of intensity followed by periods of low intensity. This
program increases your endurance by depleting your oxygen level followed by periods of recovery to
replenish oxygen. Your cardio vascular system gets programmed to use oxygen more efficiently this way.
Programming Preset Programs:
1. Press the desired program button then press the enter key.
2. The message window will ask you to enter your
Weight . You may adjust the weight setting, using the
Up and Down keys, then press the Enter key to accept the new number and proceed on to the next
screen.
3. You are now asked to enter your Age . You may adjust the age number using the Up and Down keys
then press enter to continue.
4. Next is Time . You may adjust the Time and press enter to continue.
5. Now you are asked to adjust the
Max Level.
This is the peak exertion level you will experience during
the program (at the top of the hill). Adjust the level and then press enter.
6. Now you are finished editing the settings and can begin your workout by pressing the Start key. You
can also go back and modify your settings by pressing the Stop key to go back one level, or screen.
7. If you want to increase or decrease the workload at any time during the program press the Up or
Down keys.
8. During the program you will be able to scroll through the data in the message window by pressing the
Display
key.
9. When the program ends the message window will show a summary of your workout. The summary
will be displayed for a short time then the console will return to the start-up display.
Custom User Defined Programs
The customizable User programs allow you to build and save your own workout. You can build your own
custom program by following the instructions below.
1. Select the User program (U1 or U2) then press enter.
2. The message window will ask you to enter your Weight . You may enter your weight using the Up and
Down keys, then press the Enter key to accept the new number and proceed on to the next screen.
3. You are now asked to enter your Age . You may adjust the age number using the Up and Down keys,
then press enter to continue.
4. Next is
Time
. You may adjust the Time and press enter to continue.
5. Now the first column will be blinking and you are asked to adjust the level for the first segment of the
workout. When you finish adjusting the first segment, or if you don’t want to change, then press enter
to continue to the next segment.
6. The next segment will show the same level as the previously adjusted segment. Repeat the same
process as the last segment then press enter. Continue this process until all twenty segments have
been set.
7. E35 only: Now the first column will be blinking again and you are asked to adjust the Incline level for
the first segment of the workout. Follow the same procedure for building the Incline profile as you did
for the resistance profile.