background image

GROUNDING INSTRUCTIONS 

 SPT17/20X  86037300  01/24/07  

      2-3  

THIS PRODUCT IS FOR COMMERCIAL 
USE ONLY.

 

ELECTRICAL:

 

In the USA  this machine operates on a one 15 
amp nominal 120V, 60 hz, A.C. power circuit. 
The amp, hertz, and voltage are listed on the 
data label found on each machine.  Using 
voltages above or below those indicated on the 
data label will cause serious damage to the 
motors.

 

 

 

GROUNDING INSTRUCTIONS:

 

This appliance must be grounded.  If it should 
malfunction or break down, grounding provides 
a path of least resistance for electric current to 
reduce the risk of electric shock.  This appliance 
is equipped with a cord having an equipment-
grounding conductor and grounding plug.  The 
plug must be inserted into an appropriate outlet 
that is properly installed and grounded in 
accordance with all local codes and ordinances.  
 
This appliance is for use on a nominal 120-volt 
circuit, and has a grounded plug that looks like 
the plug in “Fig. A”.  A temporary adaptor that 
looks like the adaptor in “Fig . C”  may be used 
to connect this plug to a 2-pole receptacle as 
shown in “Fig. B”, if a properly grounded outlet 
is not available.  The temporary adaptor should 
be used only until a properly grounded outlet 
(Fig. A) can be installed by a qualified 
electrician.  The green colored rigid ear, lug, or  
the like extending from the adaptor must be 
connected to a permanent ground such as a 
properly grounded outlet box cover.  Whenever 
the adaptor is used, it must be held in place by a 
metal screw.

 

 
 
 

 

 

 
 

 
Improper connection of the equipment-
grounding conductor can result in a risk of 
electric shock.  Check with a qualified 
electrician or service person if you are in 
doubt as to whether  the outlet is properly 
grounded.  Do not modify the plug provided 
with the appliance - if it will not fit the outlet, 
have a proper outlet installed by a qualified 
electrician.

 

 
 
 
 

 
 
 
 
 
 
 
 
 
 
 
 
 

 

!

WARNING: 

Содержание SPT17 10090370




























Отзывы: