Customer Service 1-888-707-1880
Dyaco Canada Inc. 2020
Email: [email protected]
11
STEP 3
1. Gather
HARDWARE FOR STEP 3
.
2. Unravel the
COMPUTER CABLE
(
30-15
) and snake it through the bottom of the
CONSOLE
MAST
(
12
) and out the top. To install mast tube (12), first insert three M8x25mm screws (75)
onto the mainframe then locate the mast tube (12) on its position and tighten three screws. Now
the last M8x25mm screw (75) must be with 5/16” flat washer (88) to tighten to the screw hole.
3. Mount the
CONSOLE MAST COVERS
(
L 61
) (
R62
) with 4
SCREWS
(
113
).
4. Install 2
WAVE WASHERS (148)
onto the
CONSOLE MAST AXLE
then install the
SWING ARMS
(
L10
)(
R11
) onto the axles. Do not force them or use a hammer as damage to
the bearings can occur. Secure with a
BOLT
(
117
) and
WASHER
(
120
) on each arm.
5. Attach the bottom of the swing arms to the rod ends of the pedal arms using 2
SHOULDER
BOLTS
(
119
) and 2
NYLON NUTS (118)
.
