4
Customer Service 1-888-707-1880
Dyaco Canada Inc. 2016
Email: [email protected]
ASSEMBLY
INSTRUCTIONS
Pre-Assembly
1.
Using a razor knife (Box Cutter), cut the banding straps that wrap around the carton.
Reach under the bottom edge of the carton and pull it away from the cardboard
underneath, separating the staples that join the two together. Lift the box over the unit
and unpack.
2.
Carefully remove all parts from carton and inspect for any damage or missing parts. If
damaged parts are found, or parts are missing, contact your dealer immediately.
3.
Locate the hardware package. The hardware is separated into four steps. Remove the
tools first. Remove the hardware for each step as needed to avoid confusion. The
numbers in the instructions that are in parenthesis (
#
) are the item number from the
assembly drawing for reference.
ASSEMBLY
TOOLS
#93.
Phillips Head Screwdriver
#100.
12/14mm Wrench
#92.
13/15mm Wrench
