21
Customer Service 1-888-707-1880
Dyaco Canada Inc. 2016
Email: [email protected]
USING
HEART RATE TRANSMITTER
How to wear your wireless chest strap transmitter:
1. Attach the transmitter to the elastic strap using the locking parts.
2. Adjust the strap as tightly as possible as long as the strap is
not too tight to remain comfortable.
3. Position the transmitter with the logo centered in the middle
of your torso facing away from your chest (some people
must position the transmitter slightly left of center). Attach
the final end of the elastic strap by inserting the round end
and, using the locking parts, secure the transmitter and
strap around your chest.
4. Position the transmitter directly below the pectoral muscles.
5. Sweat is the best conductor to measure very minute heart beat electrical signals.
However, plain water can also be used to pre-wet the electrodes (2 ribbed oval
areas on the reverse side of the belt and both sides of the transmitter). It’s also
recommended that you wear the transmitter strap a few minutes before your work
out. Some users, because of body chemistry, have a more difficult time in
achieving a strong, steady signal at the beginning. After “warming up”, this problem
lessens. As noted, wearing clothing over the transmitter/strap doesn’t affect
performance.
6. Your workout must be within range - distance between transmitter/receiver – to
achieve a strong steady signal. The length of range may vary somewhat but
generally stay close enough to the console to maintain good, strong, reliable
readings. Wearing the transmitter directly on bare skin assures you of proper
operation. If you wish, you may wear the transmitter over a shirt. To do so, wet the
areas of the shirt that the electrodes will rest upon.
Note: The transmitter is automatically activated when it detects activity from the user’s heart.
Additionally, it automatically deactivates when it does not receive any activity. Although
the transmitter is water resistant, moisture can have the effect of creating false signals,
so you should take precautions to completely dry the transmitter after use to prolong
battery life (estimated transmitter battery life is 2500 hours). The replacement battery is
Panasonic CR2032.
ERRATIC
OPERATION
Caution! Do not use this Upright Bike for Heart Rate programs unless a steady, solid Actual
Heart Rate value is being displayed. High, wild, random numbers being displayed indicate a
problem.
Areas to look for interference which may cause erratic heart rate:
1. Microwave ovens, TV
’
s, small appliances, etc.
2. Fluorescent lights.
3. Some household security systems.
4. Perimeter fence for a pet.
5. Some people have problems with the transmitter picking up a signal from their skin. If you
have problems try wearing the transmitter upside down.
6. The antenna that picks up your heart rate is very sensitive. If there is an outside noise
source, turning the whole machine 90 degrees may de-tune the interference.
7. Another Individual wearing a transmitter within 3
’
of your machine
’
s console.
If you continue to experience problems contact your dealer.
