Customer Service 1-888-707-1880
Dyaco Canada Inc
Email: [email protected]
7
CRW800H2O
PRE-ASSEMBLY
Use the following procedures to unpack and assemble your water rower manufactured by
Dyaco Canada Inc.:
Position the shipping carton so the heavy end is located at the bottom
Cut the straps then lift the box over the unit and unpack. Remove foam inserts and all
parts from the shipping carton, then use the parts list to verify that all parts are included
in your shipment.
Locate the hardware package. The hardware is separated into steps. Remove the tools
first. Remove the hardware for each step as needed to avoid confusion. As you read
through the assembly instructions, any number that is in brackets [#] refers to the item
number from the corresponding assembling drawing
NOTE: All tools required to assemble the rower are included within the packaging.
NOTE: If you are missing any of the parts listed above, inspect the packing material and the
box for items that may have been overlooked.
If parts are missing, or if you have any operational questions, please call Dyaco Canada Inc.
customer service department or the distributor who sold you the product. Have your serial
number ready.
CAUTION: Damage to the rower during assembly is not covered as part of the limited Spirit
Fitness warranty. Take care not to drop or lean the rower on its side. Carefully stand the rower
up in the normal upright position on a stable surface so it will not tip over during assembly
Protect the environment by not disposing of this product with household waste. Check your
local authority or approved waste center for recycling advice and facilities
