Customer Service 1-888-707-1880
Dyaco Canada Inc
Email: [email protected]
16
RESET PROCESS
To reset all saved settings, press and hold RESET button for 2 seconds.
CONSOLE PROGRAMS
QUICK START
As strokes are detected, the console will immediately launch QUICK START. TIME,
DISTANCE, CALORIES, SPM, WATTS, STROKES, TOTAL STROKES will begin
counting. TIME/500m and TIME/500m AVERAGE will be alternately displayed every
5 seconds. The 7-segment display will show level according to the adjustments.
When there's heart rate input, the icon will stay lit, and the
♥
icon will flash. Current
heart rates will be shown. In the absence of heart rate input, three dashes “- - -” will
be shown continuously.
TARGET TIME, DISTANCE, CALORIES, AND STROKES PROGRAMS
Target Time, Target Distance, Target Calories, and Target Strokes program allow
the target goal of each value to be customized.
Launch: Press the desired TARGET button (TIME, DISTANCE, CALORIES, STROKES).
Setup: When operating a target program (after the console has been reset), user will
enter the target value. Adjust the value by pressing
▲
or
▼
buttons, then pressing the
ENTER button to confirm the setting. If no value has been entered, the console will
not count down.
Start: Each mode display field will light up and begin to readout data as follows:
For the TARGET TIME program, the time target will begin to count down.
For the TARGET DISTANCE program, the distance will begin calculating.
For the TARGET CALORIES program, the calories will begin calculating.
For the TARGET STROKES program, the strokes will begin calculating.
End: The mode will end when the target is achieved. Pressing the RESET button at
any time will also end the target program. The workout summary will be shown after
the target program has ended, or the RESET button has been pressed.
TARGET HEART RATE PROGRAMS
The Target Heart Rate program allows the maximum beats per minute (BPM) target to be
customized to maximize cardiovascular training.
Launch: Press the Target Heart Rate button.
Setup: When operating a target program, the user enters the desired target heart rate (the
default is 100).
Adjust the value by pressing
▲
or
▼
buttons, then pressing the ENTER button to confirm.
Start: The display field will light up and begin to display heart rate and progress toward
cardiovascular goal. When the user's heart rate is lower than <10% of the calculated
maximum HR range, the
▲
on screen will flash indicating minimum goal has not yet been
achieved.
When the user's heart rate is >10% than the target HR, the
▼
on screen will flash to
indicate heart rate is over the maximum goal.
When the user's heart rate falls with the 10% of the target HR, the target number will
not display
End: The target program will end when the user stops rowing. Pressing the RESET button at
any time will also end the target program. The workout summary will be shown after the
"Target Program" has ended, or the RESET button has been pressed.
ENGINEERING MODE
Press Reset and Enter buttons for 2 seconds to enter Engineering Mode. The
console will also beep for 1 second. DISTANCE banner will blink first. Press
▲
or
▼
button to select setting section. (Sound
→
ODO
→
Sound)
