Spireon FleetLocate FL12, Руководство пользователя

Страница: 8 / 8

©2017 Spireon, Inc. All rights reserved.
FL12/12HP Installation
LED VERIFICATION:
· Connect an external 12v DC power source to the J560 and power on in
order to wake the FL12 from it’s shipping hibernation mode
· Once the FL12 is powered, the green (GPS) and amber (COM) LEDs will
flash on and off while searching for signals
· When full signal strength is achieved – generally between two and five
minutes – both LEDs should stop flashing and light up continuously
SPIREON MOBILE INSTALLER PORTAL:
· After verifying the LED patterns, log-on to the Spireon Mobile Installer
Portal at install.spireon.com to validate the installation
· Enter your username and password
· Tap sign in
· Search for the FL12 using the last four digits of the serial number
· Select the FL12 from the list to open the events list
· Find the most recent ‘power connected’ event in the events list and tap it
to open the event details page
· Confirm that the event type and event date are correct
· Confirm that the battery voltage is sufficient (~4v)
· Confirm the location is correct by tapping the map icon and viewing the
FL12’s position on the map
COMM
GPS
Condition COMM LED
Modem Off Off
Comm On -
Searching
Slow Blinking
Network connected
w/o
acknowledgement by
server
Alternates from
Solid to Fast
Blink every 1s
Network connected w/
data, acknowledge by
server
Solid
Condition GPS LED
GPS Off Off
GPS Searching Blinking
GPS Fix Solid
: