©2017 Spireon, Inc. All rights reserved.
FL12/12HP Installation
Dry Van Mounting
MOUNT LOCATIONS:
·
Covert Mount: Inside a forward access hole in the trailer’s
5
th
wheel coupler plate
·
Nose Mount: On the forward facing bulkhead, directly
above the J560
PLATE MOUNT, COVERT(DRILLED & TAPPED):
·
Using the FL12 Mounting Plate as a template, mark four
mounting holes with a pencile or marker
·
Drill the mounting holes using a #29 drill bit
·
Carefully tap each hole with an 8/32” tap on a t-handle
·
Secure the plate to the chassis using the supplied
countersunk screws
·
Secure the FL12 to the FL12 Mounting Plate using the
supplied serrated flange nuts
PLATE MOUNT, COVERT(WELDED):
·
Weld the FL12 Mounting Plate into place
·
Weld the full length of the weld tab
·
DO NOT
weld the entire plate
NOSE MOUNT:
·
Place the FL12 on the forward facing bulkhead, harness-
side down, directly above the J560 receptacle
·
Secure the FL12 using two self-tapping screws
WELD HERE
