©2017 Spireon, Inc. All rights reserved.
FL12
™
, 12HP/EQ
™
GPS Tracking Device
KIT CONTENTS:
·
FL12/12HD Tracking Device (w/ internal antenna &
integrated harness)
·
Power Harness
MOUNTING HARDWARE:
• Plate Mounted Covert:
(1x) FL12 mounting plate (3-1177)
(2x) Serrated flange nuts
(4x) Countersunk screws
• Nose Mount
(2x) #10 x ¾” TEK self-drilling screws
ADDITIONAL REQUIRED HARDWARE
(NOT INCLUDED):
• (3x) 16-22ga. ring terminals
• 6” zip-ties
IMPORTANT NOTE:
The switched power source should read 0v
with the key in the off position and 11- 14v in
the on position. For EQ installations, a 5-wire
relay (not included) must be installed
CAUTION:
Us the vehicle’s factory service manual and
a digital voltmeter to be sure that you’ve
located the appropriate wires.
REMEMBER:
When properly installed there must be an
unobstructed line of sight between the
device’s antenna and the sky. Any metallic
objects that are positioned above the device
could interfere with GPS reception.
WIRE DESCRIPTION
DEVICE HARNESS:
Black – Power Harness (Black)
Red – Power Harness (Red)
Blue – Input 1 (- trigger)
Orange – Input 2 (- trigger)
POWER HARNESS:
Brown – J560 Pin #6
Blue – J560 Pin #7
White – J560 Pin #1
