Spirax Sarco GXM16Z, Инструкция по установке и обслуживанию

Страница: 5 / 12

3.531.5275.200 5
1.16 Returning products
Customers and stockists are reminded that under EC Health, Safety and Environment Law,
when returning products to Spirax Sarco they must provide information on any hazards and the
precautions to be taken due to contamination residues or mechanical damage which may present
a health, safety or environmental risk.
This information must be provided in writing including Health and Safety data sheets relating to
any substances identified as hazardous or potentially hazardous.
1.17 Working safely with cast iron products on steam
Cast iron products are commonly found on steam and condensate systems. If installed correctly
using good steam engineering practices, it is perfectly safe.
However, because of its mechanical properties, it is less forgiving compared to other materials
such as SG iron or carbon steel.
The following are the good engineering practices required to prevent waterhammer and ensure
safe working conditions on a steam system.
Safe Handling
Cast Iron is a brittle material. If the
product is dropped during installation
and there is any risk of damage the
product should not be used unless it
is fully inspected and pressure tested
by the manufacturer.
Please remove label before
commissioning.
Prevention of water hammer
Steam trapping on steam mains
:
30÷50 m. intervals
Steam
Condasate
Trap set
Gradient 1:100
Gradient 1:100
Trap set
Condasate
Condasate
Trap set
Steam