Spinning SPINPower Studio Crank, Руководство пользователя

Страница: 11 / 20

www.spinning.com 800.847.SPIN (7746)
SPINPOWER® STUDIO CRANK OWNER’S MANUAL
5. Use a 14mm socket wrench to remove the center
crank bolt by turning it counter-clockwise. Save the
bolt so that it can be used to install the new crank.
6. Before threading in the crank removal tool, un-
thread the center bolt (on the tool) so that the tip is
recessed as shown on the right.
7. Once the tool is setup, thread the body of the crank
removal tool into the fine threads of the crank. It is
VERY IMPORTANT that this tool is threaded into the
crank in a straight manner.
DO NOT CROSS-THREAD this tool.
REMOVING YOUR
EXISTING CRANK
(continued)
11
-