Spinning SPINPower Studio Crank, Руководство пользователя

Страница: 9 / 20

www.spinning.com 800.847.SPIN (7746)
SPINPOWER® STUDIO CRANK OWNER’S MANUAL
REMOVING YOUR
EXISTING CRANK
You must remove your existing crank before installing
your new SPINPower® crank. To do so, you need a
14mm socket wrench as well as a heavy duty crank
removal tool. (SPINTech® tool by Spinning®, Park
CWP-7 Tool or equivalent available on Spinning.com).
Keep the crank from rotating during installation.
Before starting, place the crank in an easily access-
able location for both crank bolt and pedal. Then turn
the resistance knob clockwise until the flywheel and
crank are locked.
Remove the pedal.
1. Use a 15mm open end pedal wrench. Place the
wrench on the flats of the pedal axle as shown
(between the pedal body and the crank). Make sure
that the wrench is on securely. It will help to place
the wrench in a way that gravity will help you turn
the wrench
clockwise (next step).
9