Spinning 800.847.SPIN, Руководство пользователя

Страница: 12 / 28

©2016 Mad Dogg Athletics, Inc. All rights reserved. Spin®, Spinner®, Spinning®, Spin Fitness®, SPINPower® and
the Spinning logo ® are registered trademarks that are owned by Mad Dogg Athletics, Inc.
12
4. Place the cadence sensor
inside the foam holder, as
shown in Fig. 5 on page 10.
5. Affix the strip of double stick
adhesive to the underside of
the cadence sensor and foam
holder to cover the battery
access cap (as shown in Fig. 5
on page 10).
6. Peel back the adhesive cover
to expose the tape. Align it
with the magnet on the inside
of the crank arm (Fig. 8).
7. Once the cadence sensor
and the magnet are aligned,
affix the tape on the sensor
to the underside of the chain
guard shroud (Fig. 9) and test
synchronization.
NOTE: To test synchronization, first press the reset button on the sensor.
Rotate the bike pedals for at least ten rotations. A green light will flash after
each pass to confirm the synchronization between the sensor and magnet.
Fig. 9
F ig. 8
green light to confirm
synchronization