manualshive.com logo in svg

Spinfire Pro 1, Руководство пользователя

Поделиться
Скачать
Spinfire Pro 1 Скачать руководство пользователя страница 19

 

Page 19 

Manual Revision 4.1.2 

 

Example settings in this manual don’t work well for me 
 

All of our machines are slightly different due to manufacturing tolerances and 
therefore the correct settings on one machine may be slightly different on 
another. Please try adjusting your settings a little bit until the balls are landing 
where you want them to. 
 

Control panel buttons are not responding properly 
 

Please unscrew the 4 screws on the control panel and gently pull it outwards 
(wiggling it from side to side as you do). Check the flat ribbon cable to see that 
it is connected properly to the motherboard (try disconnecting it and blowing 
on it). Also check that the flat ribbon cable wasn’t crimped when fixed to the 
machine. Carefully replace the control panel, making sure not to crimp any 
cables in the process. If this does not resolve your issue, please contact your 
local dealer for support. 
 

The machine is not accurate or consistent enough 
 

To achieve the most accurate results, you must use “pressureless balls” with 
your machine. You cannot mix brands or ball types. All balls must be identical 
to achieve the highest level of consistency. Factors such as wind can also 
reduce the accuracy. 

 
The feeder motor is not working 
 

The feeder motor is the motor which turns the carousel to stir the balls and 
feed them into the throwing wheels. To begin with, please ensure your interval 
setting is on 20 when testing this function. The most common cause for the 
feeder motor not working is if the cable has detached from the motherboard. 
This can happen due to vibrations over time. Simply undo the 4 screws on 
your control panel and gently remove the control panel. You should find a two 
wire (black and red) cable hanging from the feeder motor. Please make sure it 
is firmly connected to the motherboard on the connector shown below: 
 

 

 

If this does not resolve the problem and you are confident using a multimeter, 
you may wish to test to two pins shown in the photo above. When the 
PLAY/PAUSE button is turned on, you should detect between 4V to 11V 
depending on the interval setting and interval mode. If you do not detect any 

Содержание Pro 1






















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды