SPINEA TwinSpin G Series, Руководство по эксплуатации

Страница: 7 / 14

7
Product characteristics
• To get the maximum performance from the reducer, it is important to pay attention to the installation, assembly accuracy,
sealing and lubrication. Most motor adapter flanges are available on request, please contact the sales department or your local
sales representative for further assistance.
• Reducer is a single stage, zero backlash high precision gear which may be used only when properly assembled. The reducer
can be operated in horizontal or vertical position.
• The reducer surfaces are treated with corrosion inhibitor. Please remove all corrosion inhibitor from all surfaces which are to be
connected to the input and output components / devices. Inhibitor residues negatively impact friction coefficient of clamping
and bolt connections.
• To ensure safe connection of bolt connection we strongly recommend to use 10.9 quality screws and higher.
• Requirements on radial and axial runout with direct connection with motor shaft made according to DIN 42955R
are on the picture below. Please consult DIN 42955R standard for values of the tolerances.
4. Assembly Instructions
4.1 Initial notes
4.2 Assembly preparations
4.3 Assembly tolerances