SPINEA TwinSpin G Series Скачать руководство пользователя страница 6

6

Operating manual TwinSpin

®

 G series reducers

3.4  Reducer lubrication

 

The reducers as a standard are delivered lubricated with Castrol TRIBOL GR 100-0 PD or TRIBOL GR TT 1 PD grease. 
Alternatively, the Castrol OPTIGEAR 150 oil may be used.

 

When spline connection is used to connect motor with reducer, always use grease applied on the splined shaft.  
Type of the grease is KLUEBER Microlube GL 261.

 

The lubricant change interval highly depends on the individual operating conditions. High temperatures,  speeds 
and loading will reduce the service life of the lubricant. In many cases re-lubrication will not be necessary because 
the reducer is filled for a long life. The recommended interval for lubricant change is 20 000 operating hours when 
oil is used as a lubricant.

 

Fully sealed reducers are always delivered pre-filled with lubricant. In case when open reducer is delivered,  
consult our catalogue for proper amount of lubricant to fill in.

 

Do not mix various types of lubricant in reducer. Doing so may cause damage or malfunction of reducer.

 

Consult our catalogue or our customer service for detailed information about lubrication of reducers.

 

The reducers should be transported in closed transport vehicles, in containers secured against movement 

 

or overturning. The mode of transport should follow the mutual agreement between the customer and the supplier. 
In addition, the product must be protected against the elements, aggressive vapors, dust, and mechanical damage. 
The manufacturer recommends to store reducers in the original transport package. 

 

The standard packaging in the original package ensures corrosion protection for the period of 6 months during  
storage in closed rooms with the ambient temperature from 5°C to 25°C and the relative humidity up to 60 %.  
After 6 months it is necessary to preserve the reducer again. 

 

Never stand under suspended load as this possess risk of injury.

The warranty is specified in the General Delivery Terms of SPINEA, s.r.o.  For more information visit our website: www.spinea.com

3.5  Storage and Transport

3.6  Warranty

N

N

W

Содержание TwinSpin G Series















Отзывы: