SK1265-AT6
Driving
Truck
SPIERINGS MOBILE CRANES USER MANUAL V 2.9
4-17
M
ei
2
0
1
8
Cha
n
g
e
s
a
n
d
t
y
p
o
g
ra
p
h
ic
a
l e
rr
o
rs
r
e
s
e
rv
e
d
.
©
2
0
1
8
S
p
ie
ri
n
g
s
M
o
b
ile
Cr
a
n
e
s
–
A
ll r
ig
h
ts
r
e
s
e
rv
e
d
.
By pushing the gear lever forward (+) or backward (-) over a short distance, one higher gear or one
lower gear can be chosen. This should be in the safe range of engine speed etc.
Otherwise the gear box will not perform the specified command.
By pushing the gear lever forward (+) or backward (-) over a maximum distance, two higher gears or
two lower gears can be chosen.
Accelerating
When accelerating, the gear box will automatically switch. When speeding up quickly, the gear box will
sooner skip gears and the fuel consumption will be less economic.
Braking
After braking and continue driving at a lower speed, the gear box determines the correct gear based
on speed, engine speed and the position of the accelerator (
The vehicle can be stopped in any gear. At a brief stop (such as at a traffic light), the acceleration
remains switched on.
4.5.4.
Manual mode
After starting the diesel engine (
§
) the gear box will be in the
automatic
mode
as default.
By pushing the gear lever to the left, there can be switched between
automatic
and
manual
mode.
If the gear box is in
automatic mode
, the
display gear box
shows
the number of the current gear.
The horizontal beams and arrow heads are (partly) disappeared.
By pushing the gear lever forward (+) or backward (-) over a short distance, one higher gear or one
lower gear can be chosen. This should be in the safe range of engine speed etc.
Otherwise the gear box will not perform the specified command.
By pushing the gear lever forward (+) or backward (-) over a maximum distance, two higher gears or
two lower gears can be chosen.