Operation manual - Spider ILD01G
25 / 54
rev. 03-01-04-2019
9.4 CHECKING HYDRAULIC DRIVE OIL LEVEL
Oil level should only be checked when the oil is cold.
Clear debris from around the cap, unscrew the cap
on the hydraulic oil tank on the side of the mower.
Using the dipstick check the oil level. It must be
between the limit marks.
If the level is above this range, the oil may overflow
from the breather pipe in the tank when hot. If the
level is below the lower limit, the hydraulic drive
may be damaged.
Refill with oil if necessary (HV 68 according to ISO
6743 or HLP 68, CLP 68 according to DIN 51502).
When finished, refit the cap back on the oil tank.
9.5 PREPARING THE BATTERY
SPIDER ILD01 mower uses a gel battery model 6E12, 12 V, 18 Ah
Do not fill the battery with electrolyte! The machine
construction uses a dry type of battery. If recharging,
use a maximum electric current of 1,4 A.
Unscrew the thumb wheel (A) and move aside the battery cover
(see the figure).
Remove/insert and fasten the battery
Attach the terminal connectors according to polarity. First (+)
then (-).
Secure the battery against movement with a belt.
Screw back the battery cover.
When disconnecting and removing the battery, proceed in
reversed order.
NEVER START THE MOWER WHEN A CHARGER IS
CONNECTED TO THE BATTERY. FOR CHARGING
USE ONLY SPECIAL CHARGERS PREVENTING THE
EXCESS OF THE GASSING VOLTAGE. WHEN CHARGING
THE BATTERY, MAKE SURE THAT CABLES CONNECTING
THE BATTERY TO THE MOWER ARE DISCONNECTED.
min
max
