SPIDER 2SGS EFI, Руководство по эксплуатации

Страница: 35 / 55

Operation Manual – Spider 2SGS EFI
35 / 55 rev. 01-01-02-2021
11.3 ENGINE MAINTENANCE
The following activities are considered to be workshop maintenance and should be carried out by
trained personnel
.
Before beginning any maintenance activity on the mower, turn off the engine, push the emergency
button and remove the key from the button. Also turn off the remote radio controller by the switch
on the control panel.
To eliminate the possibility of an unexpected start of the mower, disconnect the (+) terminal connector on the
battery.
The engine should only be repaired or serviced by an authorised dealer/servicing facility that possesses all
necessary tools, equipment, spare parts and professional skills.
When maintaining, repairing or cleaning, always follow the engine manufacturer’s user’s manual, which is
included in the technical manual pack.
11.4 CHANGE THE ENGINE OIL
Period of change find in Maintenance chart of engine
(see 11.2)
Change the oil while the engine is still warm, but not
hot.
- Remove the side cover of the fuel tank.
- Detach the oil drain hose from the clip.
- Unscrew and remove the oil drain cap.
Carefully lower the oil drain hose into an
approved container and allow the oil to drain
out.
- Fit the oil drain cap and secure the oil drain
hose back to the clip.
- Pour in the fresh engine oil and check the
engine oil level.
- Run the engine, check the oil level again
and top up if necessary.