SPI Infrared SBE1 M2D, Руководство пользователя

Страница: 13 / 41

TRIP Manual
Ver : 1.8
www.x20.org
•
Destination IP Port – video will be transmitted to this Port
•
Enable Bandwidth Limit – Enable/Disable Bandwidth limiting
•
Bandwidth Limit – Bandwidth limit value in kbps, in affect
only when bandwidth limit is enabled
• NTSC Field Order – When the captured input video standard is
NTSC this parameter defines which field is captured first: Odd
or Even.
•
Encoding Mode:
o
CBR – Constant BitRate: bit rate will never exceed this
value even when the video quality decreases due to fast
changes in the video
o ConstQ – Constant Quality: bit rate will be modified
according to the video frames in order to keep the quality
constant, with ConstQ the bitrate field is ignored
• Bitrate – bitrate in kbps to use, only relevant when encoding
mode is set to CBR
•
Quantization Value – defines the relation between the quality of
the compressed stream and its size, a low value dictates more
quality with larger compressed size where a high value dictates
the opposite.
The value range is: 0 – 51.
If not sure it is highly recommended to leave this value at 25
•
Algorithm – defines which algorithm will be used on the input
video: Tracker or VMD
- Page ! of ! – 13 41
- SPI Proprietary and Confidential Information -