SPI Infrared SBE1 M2D, Руководство пользователя

Страница: 8 / 41

TRIP Manual
Ver : 1.8
www.x20.org
J3 cable can be sourced from any video store
4. Functionality
The SBE1 is available in two different flavors:
SD – Standard Definition
HD – High Definition
Common functions that are supported by both flavors:
• IP Streaming of captured video using the following format:
Mpeg2Ts over RTP with H264 compression.
•
Receiving protocol commands from the user through RS232 (J2
connector) or through IP over Ethernet (J6 connector)
• Sending protocol commands to the camera through J1
connector
•
Recording the video on the SD card upon protocol command.
Adding GPS meta data to stored frames.
•
Tracking object in the video upon protocol command.
•
Notify loss of object tracking through protocol.
• Detecting motion in the video upon protocol command.
•
Notify motion detection through protocol.
2082 J6
Connecting SBE1 to Ethernet
The wire harness includes a Molex 51021-0500
connector and RJ-45 Jack (Female) and 50cm
[19.5”] long ultra flexible wires.
- Page ! of ! – 8 41
- SPI Proprietary and Confidential Information -