Sphere 8 Series, Инструкция по эксплуатации

Страница: 7 / 24

Channel Menu
(When Satellite is selected as the source)
Note: the use of DVB-S has limited functions or use depending on the country this is used in.
For your convenience, this sphere TV is pre-tuned with Free to Air New Zealand Satellite TV
Channels as transmitted on the Optus D1 Satellite.
If you reset the TV or accidentally delete a Satellite Channel, you can easily re-load them by
selecting the scan mode to Preset.
Satellite: Select an available Satellite.
Channel Type: Select a Channel type.
Service Type: Select a service type.
Scan Mode: Select a Scan mode including Blind Scan, Preset and Auto Scan.
Unicable: Select Off.
Search: Select Search and press OK on the remote control to start auto tuning.
Auto Tuning
Press the ͌ / ͊ buttons to select Auto Tuning. After pressing the
OK
button, the auto tuning
interface will be displayed. Auto Tuning can also be activated by pressing the
AUTO TUNE
button
on the remote control
Use the coloured buttons on the remote to edit the channels.
First press the / buttons on the remote to highlight the channel you want to select, then:
Press the
button to delete the channel from the program list.
Red
Press the selected channel (this channel
Blue
button to skip the will be skipped when using channel
up/down on the remote.)
Press the
Fav
button on the remote to add or remove the channel from your favourite list.
Signal Information
This displays the current signal information of the TV Signal. This option can be useful to help
you position your RV’s antenna.
5V antenna power
3UHVVŻŹEXWWRQVWRWXUQ9DQWHQQDSRZHURQRII , the default setting is off. This option can provide
a 5V output voltage to other antenna appliance when you turn on it.
LCN (Logical Channel Number)
This setting makes sure that the Channels tuned in to the TV represent the actual channel
number. For example, the main Channel 7 feed will be tuned in as Channel number 7 on the
TV, rather than the order the Channel is Tuned in. It is recommended that this setting is always
set to “ON”.
Software Update (USB)
Software updates may become available for this TV form time to time. T R update the Software, copy
WKHXSGDWHG6RIWZDUHILOHRQWRDQHPSW\86%GULYHDQGLQVHUWLQWRWKH793UHVVWKHźŸEXWWRQV and
OK to start the update process. The power LED on the TV will begin to flash slowly. When it starts
flashing fast, disconnect the power from the TV, remove the USB drive, reconnect power and turn the
TV back on.
08 09