Sphere 7 Series, Инструкция по эксплуатации, Страница: 9 / 20

Channel Menu
(When Satellite is selected as the source)
Auto Tuning
P
Note: the use of DVB-S has limited functions or use depending on the country this is used in.
For your convenience, this sphere TV is pre-tuned with Free to Air New Zealand Satellite TV
Channels as transmitted on the Optus D1 Satellite.
If you reset the TV or accidentally delete a Satellite Channel, you can easily re-load them by
selecting the scan mode to Preset.
Satellite: Select an available Satellite.
Channel Type: Select a Channel type.
Service Type: Select a service type.
Scan Mode: Select a Scan mode including Blind Scan, Preset and Auto Scan.
Unicable: Select Off.
Search: Select Search and press
OK on the remote control to start auto tuning.
DVB-S Manual Tuning
Press the ▼/▲ buttons to select DVB-S Manual Tuning. After pressing the
OK button, the tuning
interface will be displayed.
ATV Manual Tuning
Press the ▼/▲ buttons to select ATV Manual Tuning. After pressing the
OK button, the tuning
interface will be displayed.
Program Edit
Press the ▼/▲ buttons to select Program Edit. Press the
OK button to enter.
ress the
▼
/
▲
buttons to select Auto Tuning. After pressing the OK button, the auto tuning
interface will be displayed. Auto Tuning can also be activated by pressing the AUTO TUNE
Satellite Edit
Press the ▼/▲ buttons to select Satellite Edit. Press the
OK button to enter.
Satellite parameters can be entered such as the name, orbit position, LNB type etc.
Multiple Satellite Transponders can be added in the Transponder sub-menu as per
below:
Programme Edit allows you to Delete, Rename, Move (change the channel order) or Ignore certain
channels when selecting channels using the up/down arrows on the remote control. This is useful if
you have just performed an Auto or Blind scan for instance.
Use the colour keys as displayed to perform the following operations:
Red : Delete selected Channel.
Yellow : Use the up & down arrows to select the channel to move. Press OK on the remote to
select, then the arrows to move. Press OK to save the channel in the new position.
Skip : Select a channel the press to skip.
button on the remote control
10 11