Sphere 7 Series, Инструкция по эксплуатации

Страница: 5 / 20

ANT IN
DTV
ANT IN Coaxial Earphone Mini YPbPr USB IN RJ45
Smart
Mini AV PC AUDIO
CI SAT
CVBS
LINE OUT
ARC IN
OUT
There are two selections: �ON�and �OFF�,when you choose �ON�,
you can operate a compatible HDMI-CEC controlled device.
There are two selections: �ON�or �OFF�,it is avaliable when the �Speaker Preference�is set to �Ampli+er�. When
selected to �ON�,sound from Ampli+er will be heard,when selecting�OFF�,no sound from the ampli+er will be heard.
This TV is fitted with the worldwide standard IC solution for ARC compatibility.� There may be some slight
compatibility issues in head units with non-standard IC solutions installed. You may need to switch the Head
Unit off/on again in order for ARC to reconnect in some cases.
C
Connect the AC power pack or 3M 12V RV lead to
the 12VDCIN connection on the TV.
This mirrors the Video Signal from Input 12 (A/V) ONLY.
The output is Video only.
Connect the HDMI output of the accessory device to the HDMI
input on the TV.Select the HDMI input source using the INPUT
button on the remote.
Power
：
Digital Audio output for surround sound/sound bars etc.
Coaxial
：
Digital Audio output for surround sound/sound bars etc.
Earphone ：
Component Video in.
Mini YPbPr
：
Connect the PC audio output of the PC to the Audio input
jack on the TV.
PC audio
：
CI input.
CI
：
Insert the USB flash drive into the USB slot on the TV.
USB
：
For internet connection via a modem or router.
Smart TV RJ45 IN
：
Use for mouse or keyboard connection, install apps, play
media via the Smart TV and update the Smart TV Firmware.
Smart TV USB Inputs
：
Composite Video & Audio in.
Mini AV
：
HDMI
：
CVBS OUT:
Audio output for external devices such as Head Units, amplifiers etc.
LINE OUT:
Connect the RGB output of the PC to the VGA input on the TV.
VGA:
Connect the antenna to the RF IN connection. Please refer to the
Antenna Connection paragraph below.
ANT IN:
EC:
Ampli fi er Support ARC: