Operating Manual
6
1300-87075-1A
2.0 Specifications
Type of Mill
Planetary ball mill, high-energy ball mill
Grinding Containers
Canister type jar with multiple balls
Display
Touch screen
Grinding Mechanism
Grinding balls of hardened steel or stainless steel
Capacity
One 500 mL jar or one 250 mL jar
Clamp Speed
Adjustable range: 300 to 600 rpm
Clamp and Sun Wheel Motion
Circular. Clamp and sun wheel rotate in opposite directions at a 2:1 ratio
Electrical Specifications
CE approved. 115 V/230 V, 50/60 Hz
Power Cord
115 V/60 Hz model: 3-prong grounded plug supplied
230 V/50 Hz model: 2-prong European plug supplied
Circuit Breaker
Same as ON/OFF switch
Safety Features
Door locks while running. Interlock prevents mill from running if door is not
closed. Manual door release latch on top of the unit.
Run Timer
Maximum 99 hours (1 cycle), maximum 20 hours (2 – 5 cycles)
Motor
1 1/2 HP
Maximum speed: 3500 rpm
Maximum power: 220 V
Environment
For indoor use only at a maximum altitude of 6,600 ft (2000 m). Operate at
ambient conditions between 40 ºF (5 ºC) and 104 ºF (40 ºC), with maximum
relative humidity 80% below 88 ºF (31 ºC) decreasing linearly to 50% at
104 ºF (40 ºC). Main supply voltage fluctuations up to 10% of nominal voltage
(115 or 230 volts AC RMS). Pollution degree 1: none or only dry, conductive
pollution occurs.
Weight
250 lb (113 kg) (empty without jar)
Dimensions
21 in x 22 in x 15 in (54 cm x 56 cm x 38 cm)